Premocoat Base finish
Premocoat™ is a line of Portland cement based materials for finishing horizontal and vertical surfaces. Products include:

  • Base
  • EIFS Finish
  • SBC
  • Microrender
  • LimeCarve
  • Bonder
  • Sealer
  • Color Pack

Premocoat™ Base

A polymer modified cement based powder applied in thin coats. Comes in 50 lb bags and available in gray, white or color. Standard (see Premocoat Color Chart) or custom Color Packs can also be mixed in to add color.

    Instructions                                                                                            MSDS

 Applications

Thin finish stucco

An initial 1/16" thick coating is typically first applied by trowel. After a brief curing period a second 1/16" thick coating is applied by trowel, roller or sprayer. The polymer content provides more strength, ductility, hardness and moisture resistance than regular stucco finishes. Premocoat™ Base bridges cracks and resists crack propagation. It has a high compressive strength of about 4,500 psi that resists chipping and weathering. Well suited to masonry, Liteblok™ and AAC walls.

Surface leveler for horizontal and vertical surfaces

Great for creating level vertical and horizontal surfaces. Hangs vertically without sagging and cures rapidly.

EIFS base coat

Applied to expanded polystyrene (EPS) used in Exterior Insulated Finishing Systems (EIFS). Mesh then embedded in base coat.

Priming the surface for stampable overlays

Base coat applied to horizontal and vertical surfaces as a primer prior to the application of Premocoat™ SBC as a stampable overlay.

Repair and resurfacing of existing concrete

Patch or repair concrete, stucco or masonry surfaces. Covers blemishes and cracks.

A Premocoat™ Base sample can be ordered for evaluation and mailed anywhere in the US for a charge of $20 including shipping and handling (Order from our Ebay Store).

Premocoat™ EIFS Finish

A polymer modified, self curing, cement based fine aggregate powder. Mold/ mildew and freeze/ thaw resistant. Available in gray, white or specified color in 50 lb bags.

    Instructions                                                                                            MSDS

Applications

Finish coat for Exterior Insulated Finishing Systems (EIFS)

Fine aggregate allows for a very smooth finish by trowel. By varying application techniques a variety of textures can be created.

Smooth topping over a Premocoat™ Base coat resurfacing of existing concrete

Thin topping over Base coat creates a very smooth finish. Due to the fine particle distribution it will featheredge without crumbling and can be used on interior and exterior surfaces.

A Premocoat™ EIFS Finish sample can be ordered for evaluation and mailed anywhere in the US for a charge of $20 including shipping and handling (Order from our Ebay Store).

Premocoat™ SBC

A polymer modified, fiber reinforced, single component powder. Available in 50 lb bags in a gray or white base and accepts integral color.

    Instructions                                                                                            MSDS

Applications

Surface bonding cement

Surface bonding cement (SBC) is a structural coating used to strengthen existing masonry walls or to create dry stacked CMU block walls. Unlike regular SBC, the addition of polymer in the Premocoat™ SBC mix creates a stronger, more elastic and more weather resistant coating.

Stucco finish

Meets ASTM C926 requirements for stucco. Apply a crack resistant finish over concrete or masonry up to 5/8" thick.

Stampable overlay

A stampable overlay is applied to an existing concrete substrate then stamped to create the desired texture, pattern or look. Can be used with vertical and horizontal surfaces and interior and exterior walls. Accepts color hardeners, integral color and sealers.

A Premocoat™ SBC sample can be ordered for evaluation and mailed anywhere in the US for a charge of $20 including shipping and handling (Order from our Ebay Store).

Premocoat™ Microrender

A cement based, polymer modified coating. Less than the cost of paint, Premocoat Microrender is an economical paint alternative that can be sprayed, brushed or rolled. Available in gray, white or colored to specification. Powder is available in 5 and 2 gallon pails and is mixed with water only prior to use.

    Instructions                                                                                            MSDS     

 Applications

Economical alternative to paint or stain

A single coat leaves an opaque "paint" color. If applied to uncured or "green" concrete the finish will cure with the substrate creating an even stronger bond. No primer is needed prior to use. More compatible with masonry substrates than paint or stain with superior colorfastness thanks to the inorganic pigments used.

A Premocoat™ Microrender sample can be ordered for evaluation and mailed anywhere in the US for a charge of $20 including shipping and handling (Order from our Ebay Store).

Premocoat™ LimeCarve

A single component, polymer modified cement based powder that can be applied then carved providing a stone look. Available in 50 lb bags and accepts integral color.

    Instructions                                                                                              

 Applications

Create the look of cut stone

Overlay applied from 1/4" to 5/8" thick then carved to create the look of cut and mortared limestone. Can be applied to interior and exterior well cured concrete substrates.

A Premocoat™ LimeCarve sample can be ordered for evaluation and mailed anywhere in the US for a charge of $20 including shipping and handling (Order from our Ebay Store).

Premocoat™ Bonder

A concentrated acrylic polymer emulsion used as a primer. A liquid, it is available in 5 gallon pails.

 Applications

Promote adhesion between cementitious substrate and new Portland cement based coating

For better adhesion, apply to an existing concrete or masonry surface prior to the application of Premocoat™ SBC and similar finishes.

Admixture for Premocoat™ SBC

Add to and mix with Premocoat™ SBC to enhance its moisture, chemical and UV resistance.

A Premocoat™ Bonder sample can be ordered for evaluation and mailed anywhere in the US for a charge of $25 including shipping and handling (Order from our Ebay Store).

Premocoat™ Sealer

Clear acrylic sealer containing 25% solids. Available in 5 gallon pails.

 Applications

Provides additional moisture resistance for concrete and cementitious finishes

Applied to Premocoat™ Base, EIFS Finish, SBC and Microrender, it will provide additional resistance to moisture penetration.

Makes colored finishes more vibrant and glossier

Significantly changes the appearance of Premocoat™ Base, EIFS Finish, SBC and Microrender finishes by making the surface color appear deeper and glossier.

Creates an easier to clean, more mold and mildew resistant surface

Seals pores eliminating sites where dirt can collect and mold and mildew develop.

A Premocoat™ Sealer sample can be ordered for evaluation and mailed anywhere in the US for a charge of $25 including shipping and handling (Order from our Ebay Store).

 Premocoat™ Color Pack

Dry powder pigments in small packs. Standard colors can be viewed on the Premocoat Color Chart.

Applications

Pigment

Added to and mixed with Premocoat™ Base, EIFS Finish, SBC and Microrender powder products to create integral color.

A Premocoat™ Color Pack sample can be ordered for evaluation and mailed anywhere in the US for a charge of $15 including shipping and handling (Order from our Ebay Store).